| Part number | Brand | Description |
|---|---|---|
| 0129-9535-23S, 1140-A0291 | SPECTRA | AMAT Diode Laser w/Fiber Optics Cable. Spectra OEM No. |
| 140P | SPECTRA | Description Model Litrex Ink Jet System Printer Model Printhead 128 nozzle Spectra Printhead currently set to use SE-128 printheads. Chuck accommodates 14” substrates and can be heated if required on the lower X-axis track. Image recognition to allow accurate substrate alignment using a camera situated on the top Y-gantry Printhead has theta axis to control print pitch of the printhead. Alignment accuracy of 5-10microns. Hepa filtered enclosure and cabinet extraction with capping station for printhead. |
| 342-008 | SPECTRA | MICROVISION PLUS RGA NOR-CAL MASS SPECTROMETER FILAM HEAD |
| 4H-SiC | SPECTRA | Raman spectroscopy enables precise, non-destructive stress analysis in 4H-SiC semiconductors. This study shows how peak shifts in Raman spectra reveal stress variations from surface treatments like cutting, lapping, and CMP supporting quality control and process optimization in electronics. |
| Fig.1 | SPECTRA | The source of radiation for photolithography has traditionally been a Hg or Hg-rare gas discharge lamp. The emission spectra from a high pressure mercury lamp is shown in Fig.1 . The equilibrium pressure of Hg and the rare gas determine the spectral distribution of the light output. This output is high in the near-UV region 350-450 nm and in the mid-UV region 300-350 nm, and lower in the DUV region 200-300 nm. |
| FT04-035 | SPECTRA | DEMOUNTABLE PATHLENGTH CELLS, FT04-036 |
| HPQ 2 | SPECTRA | RESIDUAL GAS ANALYSER CU LM75 ANALYSER LM506 |
| LM63 | SPECTRA | LABORATORY GAS ANALYSER VACSCAN PLUS LM2 LM4 |
| SEDA24AT0100 | SPECTRA | CIRCUIT BREAKER 2 POLE, 480VAC |
| SPECTRA VRM III | SPECTRA | DUAL PULSED ND, YAG LASER SYSTEM |